unisonic technologies co., ltd mpsa42/43 npn silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2010 unisonic technologies co., ltd qw-r208-034.c high voltage transistor ? description the utc mpsa42/43 are high voltage transistors, designed for telephone switch and high voltage switch. ? features *collector-emitter voltage: v ceo =300v(utc mpsa42) v ceo =200v(utc mpsa43) *high current gain *complement to utc mpsa92/93 *pb-free plating product number: mpsa42l mpsa43l ? ordering information ordering number pin assignment normal lead free halogen free package 123 packing mpsa42-ab3-r mpsa42l-ab3-r mpsa42g-ab3-r sot-89 b c e tape reel mpsa42-t92-b mpsa42l-t92-b mpsa42g-t92-b to-92 e b c tape box mpsa42-t92-k mpsa42l-t92-k MPSA42G-T92-K to-92 e b c bulk mpsa43-ab3-r mpsa43l-ab3-r mpsa43g-ab3-r sot-89 b c e tape reel mpsa43-t92-b mpsa43l-t92-b mpsa43g-t92-b to-92 e b c tape box mpsa43-t92-k mpsa43l-t92-k mpsa43g-t92-k to-92 e b c bulk
mpsa42/43 npn silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r208-034.c ? absolute maximum ratings (operating temperature range applie s unless otherwise specified) parameter symbol ratings unit mpsa42 300 v collector-base voltage mpsa43 v cbo 200 v mpsa42 300 v collector-emitter voltage mpsa43 v ceo 200 v emitter-base voltage v ebo 6 v collector current ic 500 ma sot-89 500 mw collector dissipation (ta=25 ) to-92 pc 625 mw junction temperature t j 150 c storage temperature t stg -55 ~ +150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t j =25 c, unless otherwise specified) parameter symbol test conditions min typ max unit mpsa42 300 v collector-base breakdown voltage mpsa43 bv cbo ic=100 a, i e =0 200 v mpsa42 300 v collector-emitter breakdown voltage mpsa43 bv ceo ic=1ma, i b =0 200 v emitter-base breakdown voltage bv ebo i e =100 a, ic=0 6 v mpsa42 v cb =200v, i e =0 100 na collector cut-off current mpsa43 i cbo v cb =160v, i e =0 100 na mpsa42 v eb =6v, ic=0 100 na emitter cut-off current mpsa43 i ebo v eb =4v, ic=0 100 na dc current gain h fe v ce =10v, ic=1ma v ce =10v, ic=10ma v ce =10v, ic=30ma 80 80 80 300 collector-emitter satu ration voltage v ce(sat) ic=20ma, i b =2ma 0.2 v base-emitter satura tion voltage v be(sat) ic=20ma, i b =2ma 0.90 v current gain bandwidth product f t v ce =20v, ic=10ma, f=100mhz 50 mhz mpsa42 3 pf collector base capacitance mpsa43 ccb v cb =20v, i e =0 f=1mhz 4 pf
mpsa42/43 npn silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r208-034.c ? typical characteristics 10 0 10 1 10 2 10 0 10 1 10 2 10 3 dc current gain, h fe collector current, ic(ma) fig.1 dc current gain 10 -1 10 0 10 1 10 2 10 3 collector current, ic(ma) 10 -2 10 -1 10 0 10 1 fig.2 saturation voltage v ce(sat) ,v be(sat) (v) v ce(sat) v be(sat) ic=10*i b fig.4 current gain bandwidth product 10 1 10 2 10 3 current gain bandwidth product (mhz) collector current, ic(ma) v ce =20v v ce =10v 10 0 10 1 10 2 10 -1 10 0 10 1 10 2 collector-base voltage(v) 10 1 10 2 fig.3 capacitance i e =0 f=1mhz capacitance (pf) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
